6 Selective monitoring of 24V feeders
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
53
S
iem
e
n
s A
G
2
0
1
9
A
ll r
igh
ts
re
se
rv
e
d
Note
If you need message texts in several languages, you use the menu command
" ools > Manage multilingual texts > Change language…" in the S M C
Manager to change the language for display texts and adapt the text in the
message configuration for the set language.
6.5
Creating a process picture
You need a process picture to visualize the status of the selectivity module.
Proceed as follows:
1. If not already done, create a new process picture (1) in the folder of the
technological hierarchy in which the previously edited CFC chart is located.
Figure 6-9:
1
2. Execute the Compile OS function so that the process variables, the messages,
and the block icon in the OS project are generated.
3. Open the process picture using the WinCC Graphics Designer.
4. Draw the process picture as desired.
5. Depending on whether you use a module with a common alarm or with single-
channel alarm, the following symbols are created. Position the symbols in the
designated places.
–
Symbols for single-channel alarm (2) or symbol for common alarm (3)
–
Symbol for generating the reset signal (4)
6. Save the adapted process picture and close it.
