Kapitelüberschrift hier eintragen
4 - 3
Siemens AG
SPR2-230.814.01
Page 3 of 14
SIREMOBIL Iso-C 3D
Medical Solutions
Rev. 05
08.04
CS PS 24
Limit switches
4
•
Attach the two limit switches at the cable module using M4 x 8 screws, washers and
contact washers (Fig. 7, Fig. 8 and Fig. 9).
Setting the limit switches
4
•
Move the C-arm by hand into the end position.
•
Attach the two limit switches so that the cams enable the switching mechanisms at the
switches (Fig. 10).
•
When set correctly, you can hear the click emitted by the limit switches.
•
Angulation 0°.
•
Test the function of the limit switches by moving the C-arm into the +95° und -95° orbital
positions.
•
Check these settings at least twice.
Fig. 7
Attaching both limit switches
Fig. 8
Limit switch in switching position
Fig. 9
Limit switch with cabling
Fig. 10 Setting the limit switch