Description
1.2 Properties: TM15 / TM17 High Feature
TM15 / TM17 High Feature Operating Manual
14
Commissioning Manual, 05/2009
The outputs are equipped with short-circuit protection, shutdown in case of overtemperature,
and reverse-polarity protection. The actual signal state of each output channel can be read
back on the SIMOTION side.
The differences between the TM15 and TM17 High Feature Terminal Modules are defined
by their range of application. The TM17 High Feature has fewer I/O channels than TM15, but
offers increased functionality.
The TM17 High Feature is distinguished by especially high resolution and accuracy as well
as a parameterizable input filter and enable inputs.
The enable inputs can activate inputs of measuring inputs or outputs of output cams (gate
function).
●
Level-controlled enable for inputs of measuring inputs
●
Level- or edge-controlled enable for outputs of output cams
In addition, TM17 High Feature supports cyclic measurement of up to 2 edges per position
control cycle clock.
Due to their high accuracy, the DI/DO channels of the TM17 High Feature are non-isolated.
Note
The module hardware of the TM15 and TM15 DI/DO is identical, but there is a difference
between the two modules in terms of system integration. For this reason, they must be
configured as different input/output components.
This Commissioning Manual describes how to integrate the TM15 and TM17 High Feature
into SIMOTION. Integration of the TM15 DI/DO via BICO technology is not covered in this
Commissioning Manual. You will find more information on integrating the TM15 DI/DO via
BICO technology in the SINAMICS S120 Commissioning Manual as well as in the
SIMOTION D4xx Commissioning and Hardware Installation Manuals.
