Detailed descriptions
15.4 BIOS Setup
SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02
107
15.4
BIOS Setup
You can configure the system functions and hardware configuration in the BIOS.
The BIOS is set to a default state suitable to the respective device configuration prior to
delivery. The most important settings are shown in the table below.
Tab
Option
Setting
Boot Options -> Post Errors
No halt on any errors
Main
Boot Options -> Quiet Boot
Disabled
Peripheral Configuration ->USB
BIOS Supported Devices
Peripheral Configuration -> ATA
Controller Config > S-ATA Mode
Peripheral Configuration -> LAN
Remote Boot
All
RAID (optional for RAID systems)
Disabled
Advanced
Advanced System Configuration ->
Core Multi-Processing
Disabled (on Windows 2000 systems)
System Mode Config.
Performance
APM Interface
Disabled
APM Power saving
Disabled
ACPI Save to RAM
Disabled
Power
Power failure recovery
Always on
The BIOS reference manual on the supplied "Documentation & Drivers" CD shows you how
to access and change the BIOS setup. The manual also contains detailed descriptions of the
menus and setting options offered by the BIOS setup.
NOTICE
Updating the BIOS or calling the "Default settings" function changes the BIOS settings.
Pay special attention to the correct settings in the "Power" tab.
All menu items are set to "Disabled" by default.
The operating system functions "Save to RAM" (standby) and "Save to Disk" (hibernate)
are not approved for the Rack PC.
Summary of Contents for SIMATIC Rack PC 547B
Page 6: ...Table of contents SIMATIC Rack PC 547B 6 Operating Instructions 12 2007 A5E01127519 02 ...
Page 22: ...Description 3 6 Design SIMATIC Rack PC 547B 22 Operating Instructions 12 2007 A5E01127519 02 ...
Page 136: ...Index SIMATIC Rack PC 547B 136 Operating Instructions 12 2007 A5E01127519 02 ...
