Siemens SIMATIC Rack PC 547B Operating Instructions Manual Download

Page: 79 / 136

Maintenance and service

11.2 Reinstalling the software

SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02

11.2.3.2

Installing Microsoft Windows operating systems

This CD contains encrypted data that can only be transferred to this system.
1.

Boot from the Recovery CD and then follow the on-screen instructions until the Recovery

functions window is displayed.

Select "Recovery Windows ..." in the "Siemens SIMATIC Recovery" window.

Follow the instructions on the screen.

Note
Make sure that sufficient free space is left on the drive after the transfer of selected

recovery data:

500 MB for Windows 2000

1500 MB for Windows XP

1500 MB for Windows Server 2003

Select "Start command prompt" in the Recovery functions window.

Enter the following command in the displayed command prompt interface:

Drive:

cd \I386

Winnt32.bat

Drive: Drive letter of the folder containing the I386 directory.

The preparation of the Windows installation is displayed.

When this is completed, close the command prompt with the

exit

command.

Close the Siemens SIMATIC Recovery window with the "Finish" button.

The Windows installation is completed following an automatic restart of the system.

10.

Follow the instructions on the screen.

Note
References required by professional users of Microsoft Windows (not included in the

scope of delivery):

Microsoft Windows 2000 Professional Resource Kit (MSPress No 274) or

Microsoft Windows XP Professional, Technical Reference (MSPress No 934)

Microsoft Windows Server 2300, Planning Server Deployment for Windows Server 2003,

Technical Reference (MSPress No. 420)
These manuals contain specific information for administrators who install, manage and

integrate Windows in networks or multi-user environments.

Summary of Contents for SIMATIC Rack PC 547B









































































































































Search results

Summary of Contents for SIMATIC Rack PC 547B

Reviews:

Related manuals for SIMATIC Rack PC 547B

Brands by name

Popular brands

Siemens SIMATIC Rack PC 547B, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Rack PC 547B

Reviews:

Related manuals for SIMATIC Rack PC 547B

Brands by name

Popular brands