SIMATIC PN/J1939 LINK
Operating Instructions, 12/2018, A5E45307564-AA
5
Introduction
1
1.1
Preface
Purpose of this documentation
These operating instructions contain all information for configuring, installation,
commissioning and operation of the PN/J1939 LINK.
These operating instructions are intended for qualified personnel in the following target
groups:
●
Commissioning engineers
●
Operating and service personnel
●
System integrator
Knowledge required
The following knowledge is required in order to understand the operating instructions:
●
Knowledge of programming a SIMATIC S7 controller
●
Knowledge in the application of the TIA configuration environment
●
Knowledge of working with the PROFINET fieldbus
●
Well-founded knowledge in the SAE J1939 communication protocol
●
General knowledge in the field of automation technology
●
General knowledge of communication networks
Trademarks
SIMATIC
®
is a registered trademark of Siemens AG.
History
Edition
Note
12/2018
First edition
Naming conventions
The term "PN/J1939 LINK" or "device" is used in this documentation instead of the full
product name "SIMATIC PN/J1939 LINK".
The term "S7 controller", or "S7" for short, is also used for the SIMATIC S7 controller.
Summary of Contents for SIMATIC PN/J1939 LINK
Page 1: ...SIEMENS siemens com ...
Page 2: ......
