Siemens SIMATIC NET SCALANCE M80PB, Getting Started

Page: 49 / 62

PROFINET connection
3.2 Remote service
Cloud Connector
Getting Started, 07/2020, C79000-G8976-C507-03
49
Settings used
For the configuration example, the devices are given the following IP address settings:
Device Interface IP address
SINEMA RC server
(PC1a)
LAN port 192.168.0.150
255.255.255.0
WAN port 192.168.20.150
255.255.255.0
The WAN IP address via which the SINEMA RC server can be
reached is the WAN IP address of the router in this example,
192.168.203.150.
Default gateway is the LAN IP address of the router
192.168.20.2
Router 1 (R1) LAN port 192.168.20.2
255.255.255.0
WAN port Static IP address assigned by provider, e.g. 192.168.203.150
PC
(PC1b)
LAN port
(vlan1)
192.168.0.20
255.255.255.0
Service technician
(PC2)
192.168.5.1
255.255.255.0
Default gateway is the LAN IP address of the router
192.168.5.2
Router 2 LAN port 192.168.5.2
255.255.255.0
WAN port Dynamic IP address from the provider
SCALANCE M874-3 LAN port
(vlan1)
192.168.16.84
255.255.255.0
ppp0 Dynamic IP address from the provider
CPU 317 - 192.168.16.31
Use a PC to configure the SCALANCE M804PB and the SINEMA RC server. To do so, you must
assign the IP address to the PC network adapter. In the extended TCP/IP settings of the
network adapter configuration you have the option of adding additional IP addresses.
Note
The IP settings used in the configuration example were freely chosen.
In a real network, you would need to adapt these IP settings to avoid possible address
conflicts.