Siemens SIMATIC NET SCALANCE M80PB, Getting Started

Page: 3 / 62

Cloud Connector
Getting Started, 07/2020, C79000-G8976-C507-03
3
Preface
Purpose
The configuration of the Cloud Connector is shown with examples.
Validity
Getting Started applies to the SCALANCE M-800 firmware version V6.3 or higher.
IP settings for the examples
Note
The IP settings used in the examples were freely chosen.
In a real network, you would need to adapt these IP settings to avoid possible address
conflicts.
Further documentation
• Configuration Manual: SCALANCE M-800 Command Line Interface
This document contains the CLI commands supported by SCALANCE M-800 devices.
• Getting Started
Based on examples, these documents explain the configuration of the SCALANCE M-
800/S615.
• Operating instructions
These documents contains information on installing, connecting, maintaining and
servicing the following products.
Operating instructions Products
SCALANCE M804PB SCALANCE M80PB
SCALANCE M874, M876 SCALANCE M874-2
SCALANCE M874-3
SCALANCE M876-3
SCALANCE M876-4
SCALANCE M812, M816 SCALANCE M812-1
SCALANCE M816-1
SCALANCE M826 SCALANCE M826-2