Configuration
5.4 Configuring the telecontrol instructions
CP 1242-7
72
Operating Instructions, 09/2011, C79000-G8976-C247-02
Block for activating / deactivating TeleService users
SDT for activating or deactivating TeleService users already configured in the STEP 7
project of the CP. In STEP 7, the corresponding data can be found in the parameter area
"TeleService settings" > "TeleService user management".
Table 5- 18 IF_CONF_GPRS_UserList
Parameter
Data type
Initial value
Description
Id
UINT
19
ID of the parameter field
Length
UINT
Length of the parameter field in bytes: 506
Mode
UINT
Validity (1: permanent, 2: temporary)
StructUser [1...10]
ARRAY [1...10]
of STRUCT
GPRS_User
TeleService user no. 1 to max. no. 10
The array is formed from the parameter records for the TeleService users ("GPRS_User"
[1...n]).
Table 5- 19 GPRS_User [n] (parameter for TeleService user)
Parameter
Data type
Initial value
Description
UserName [n]
STRING [22]
TeleService user name
Password [n]
STRING [22]
- The string must be empty! -
Diag_Allowed [n]
BOOL
- Reserved - (cannot be set)
Teleserv_Allowed [n]
BOOL
Activation of the TeleService user
0 = user is deactivated
1 = user is activated
FW_Load_Allowed [n] BOOL
- Reserved - (cannot be set)
Field for setting the parameters for TeleService access (DNS name of the server)
Access data of the TeleService server (switching station).
In STEP 7, the corresponding data is located in the parameter area "TeleService settings".
If there is more than one TeleService server, use the field once per server.
Table 5- 20 IF_CONF_TS_Name
Parameter
Data type
Initial value
Description
Id
UINT
20
ID of the parameter field
Length
UINT
Length of the parameter field in bytes: 266
Mode
UINT
Validity (1: permanent, 2: temporary)
TSName
String [254]
Name of the TeleService server that can be resolved by
DNS
RemotePort
UINT
Port of the engineering station
Rank
UINT
Priority of the server [1] or [2]
1 = server 1, 2 = server 2
