Certification
6.1.7 ANATEL
6.1.7
ANATEL
This device meets the regulation for certification and approval of products for
telecommunications by Agência Nacional de Telecomunicações (ANATEL) in Brazil:
• Resolução nº 715, de 23 de outubro de 2019
Notices specific to ANATEL:
Note
This equipment is not certified for use on 2G, 3G or 4G LTE networks in Brazil.
Note
This equipment operates on a secondary basis. That is, it is not entitled to protection
against harmful interference, even from the same type of station, and may not cause
interference to systems operating on a primary basis.
Note
This equipment has no right to be protected from harmful interference and may not
cause interference in duly authorized systems.
6.1.8
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
ISO 9001:2015
Quality management systems – Requirements
6.1.9
ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
• Radiocommunications (Compliance Labelling – Devices) Notice 2014 made
under Section 182 of the Radiocommunications Act 1992
• Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
• Radiocommunications (Compliance Labelling – Electromagnetic Radiation)
Notice 2003 made under Section 182 of the Radiocommunications Act 1992
• Telecommunications Labelling (Customer Equipment and Customer Cabling)
Notice 2001 made under Section 407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
44
RUGGEDCOM RX1501
Installation Manual, 10/2021, C79000-G8976-1054-21
