manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM RX1501, Installation Manual

The Siemens SIMATIC NET RUGGEDCOM RX1501 is a robust and reliable networking device designed for industrial environments. Ensure smooth installation and operation by downloading the comprehensive Installation Manual for free from our website. Empower yourself with the necessary instructions to unleash the true potential of this exceptional product.

Share
Download
background image

Modules

4.4 Installing/Removing Power Modules

4. Insert the module into the empty slot.

3

2

1

     1    

Chassis

     2    

Power Module

     3    

Screws

Figure 4.6

Installing a Power Module

5. Hand-tighten the screws to secure the power module to the chassis.
6. Turn on power to the device and confirm the module is receiving and supplying

power. This is indicated by the LEDs on the module.

LED

State

Description

O

Green

The module is supplying power

I

Green

The module is receiving power

RUGGEDCOM RX1501

Installation Manual, 10/2021, C79000-G8976-1054-21

33

Summary of Contents for SIMATIC NET RUGGEDCOM RX1501



























































Reviews:

No comments

Related manuals for SIMATIC NET RUGGEDCOM RX1501

Brands by name

Popular brands

Load more brands