Certification
6.1.4 FCC
•
EN 55032
Information Technology Equipment – Radio Disturbance Characteristics – Limits
and Methods of Measurement
The device is marked with a CE marking and notified body number, and can be used
throughout the European community.
0680
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd..
For contact information, refer to
"Contacting Siemens (Page vii)"
.
6.1.4
FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.5
FDA/CDRH
This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
• Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
6.1.6
ISED
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following ISED (Innovation Science and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)
RUGGEDCOM RX1501
Installation Manual, 10/2021, C79000-G8976-1054-21
43
