Siemens SIMATIC Ident RF360M Operating Instructions Manual Download Page 24

Page: 24 / 94

Commissioning

4.1 Commissioning (hardware)

Mobile reader SIMATIC RF360M/RF660M

Operating Instructions, 08/2022, C79000-G8976-C660-02

Antenna field and read position

The following figure shows the antenna field (working range) of the SIMATIC RF160B in

connection with a UHF head module, as well as the optimum read position of the

transponder and its alignment.

①

Working range

≤

60 ° in front of the UHF head module (with horizontal alignment

of the

transponder axis)

②

Optimum transponder alignment to the mobile reader (maximum range)

③

Alternatively transponder alignment to the reader (range reduced by approx. 20%)

Figure 4-8

Radiation of the antenna field of the UHF head module

Procedure

You can easily replace the head module interface cover or the head module by sliding it off or

onto the base device from the side.

Figure 4-9

Replacing the head module

4.1.5

Attaching/replacing the retaining strap

The SIMATIC RF160B is delivered with a retaining strap intended to guarantee a secure hold.

Summary of Contents for SIMATIC Ident RF360M































































































Search results

Summary of Contents for SIMATIC Ident RF360M

Reviews:

Related manuals for SIMATIC Ident RF360M

Brands by name

Popular brands

Siemens SIMATIC Ident RF360M, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Ident RF360M

Reviews:

Related manuals for SIMATIC Ident RF360M

Brands by name

Popular brands