Siemens SIMATIC HMI KTP1200 Basic DP Operating Instructions Manual Download Page 85

Page: 85 / 132

Commissioning a project

6.7 Updating the operating system - Basic Panel with PROFINET interface

Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB

Select the HMI device image file (file type "*.fwf") under "Image path".
The HMI device image files are available under

"Programs\Siemens\Automation\Portal V<

TIA version

>\Data\Hmi\Transfer\

<TIA version>\Images".
The output area provides information on the version of the successfully opened HMI

device image file.

Set "Transfer" mode on the HMI device.
If automatic transfer mode is enabled on the HMI device, the device automatically sets

"Transfer" mode when an update is initiated.

Select "Update OS" on the PC to run the operating system update.

Follow the instructions in ProSave.
A progress bar indicates the progress of the operating system update.
A message is displayed when the operating system update is successfully completed and

the HMI device is restarted.

Result

The transferred image is available on the HMI device.

6.7

Updating the operating system - Basic Panel with PROFINET

interface

6.7.1

Overview

Updating the operating system

A compatibility conflict may occur when transferring a project to the HMI device. This is

caused by different versions of the configuration software used and the HMI device image

available on the HMI device. If there are different versions, the transfer is aborted. A

message indicating a compatibility conflict is displayed on the configuration PC.

Summary of Contents for SIMATIC HMI KTP1200 Basic DP





































































































































Search results

Summary of Contents for SIMATIC HMI KTP1200 Basic DP

Reviews:

Related manuals for SIMATIC HMI KTP1200 Basic DP

Brands by name

Popular brands

Siemens SIMATIC HMI KTP1200 Basic DP, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC HMI KTP1200 Basic DP

Reviews:

Related manuals for SIMATIC HMI KTP1200 Basic DP

Brands by name

Popular brands