Installing the CPU 41x-2 PCI and the Software
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
41
2.7
Installation of WinAC Slot 41x Software
2.7.1
Installing the WinAC Slot 41x Software
Die WinAC Slot 41x software has a setup program for the CPU 412-2 PCI or CPU
416-2 PCI. This setup program also installs the controller panel and WinAC Time
Synchronization software components.
System Requirements
When installing the components of WinAC Slot 41x, you should observe the notes
under System Requirements.
Requirements
Before you can install a software package, you must log on with Administrator
rights. Otherwise, the Setup will be canceled.
If an Older Version of WinAC Slot is Already Installed
Prior to installation, you must always uninstall any older versions of WinAC Slot.
For instructions on how to do this, refer to Uninstalling the WinAC Slot 41x
Software.
Installation Sequence
If you are installing software packages individually, we recommend the following
sequence:
1. Install the following components using the general setup
-
SIMATIC WinAC CPU 41x-2 PCI (minimum)
-
WinAC Time Synchronization, if you want to synchronize the CPU 41x-2
PCI using a SIMATIC CP or the PC clock.
2. If necessary, STEP 7 or the hardware update of WinAC Slot for STEP 7
3. If necessary, the SIMATIC Net CD for network components
4. If necessary, WinCC or WinCC flexible
