User Tasks
2.2 Configuring the Windows Ethernet Interface
Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
Manual, 12/2007, A5E01217837-01
41
Entering the Selected IP Address in Your STEP 7 Project
If you choose a different IP address, subnet mask, or gateway for the Ethernet interface, you
must configure this IP address or other parameters for both of the SIMATIC Embedded PCs
and for the IE General properties in STEP 7. To configure the IP address in STEP 7, follow
these steps:
1.
Right-click the IE General in PC Station index 3 in the hardware configuration of your
STEP 7 project.
2.
Select Object Properties from the context menu.
3.
Click the Properties button from the General tab of the Properties - IE General dialog.
4.
Enter the IP address from the Parameters tab of the "Properties - Ethernet interface IE
General" dialog. You can also specify a subnet mask or gateway address from this
dialog:
Microbox 427B -HMI/RTX
Figure 2-6
STEP 7 IP Address: Microbox 427B-HMI/RTX
