Product Overview
1.4 Pre-configured SIMATIC Panel PC 477B-HMI/RTX
Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
20
Manual, 12/2007, A5E01217837-01
1.4
Pre-configured SIMATIC Panel PC 477B-HMI/RTX
The SIMATIC Panel PC 477B-HMI/RTX is a SIMATIC Panel PC 477B that includes the
Windows XP
E
mbedded operating system, WinCC flexible RT 2007, WinAC RTX 2005 SP2,
and built-in CP 5611 and Industrial Ethernet communication interfaces. All software is pre-
installed on your SIMATIC Panel PC 477B-HMI/RTX and pre-configured. You do not have to
perform any additional installation or configuration; however, you can use the SIMATIC PC
Panel Wizard to adjust your Panel PC display preferences.
HMI/RTX Configuration
The initial configuration of SIMATIC Panel PC 477B-HMI/RTX, as shown below, includes the
following components:
●
"OPC Server" in index 1 of the PC station
●
"WinLC RTX" (Windows Logic Controller of WinAC RTX 2005) in index 2 of the PC
station
●
Built-in "CP 5611," configured as a WinLC RTX submodule in IF1, available for
PROFIBUS DP communication
●
Second on-board Industrial Ethernet interface ("Ethernet 2"), configured as "IE_General"
in index 3 of the PC Station
●
"WinCC flexible RT" in index 4 of the PC Station
NOTICE
The Windows Firewall is enabled. All necessary SIMATIC protocols are registered as
exceptions. You can use the CP5611 card or the Industrial Ethernet interface to
download STEP 7 projects.
