Product Overview
1.4 Pre-configured SIMATIC Panel PC 477B-HMI/RTX
Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
22
Manual, 12/2007, A5E01217837-01
You do not have to install the SIMATIC Panel PC 477B-HMI/RTX configuration; you do not
have to perform any additional configuration in the PC Station.
The following picture shows the initial configuration as represented in the Station
Configuration Editor and WinLC Properties:
Figure 1-6
Station Configuration Editor: Panel PC 477B-HMI/RTX
NOTICE
If for any reason you need to re-configure your PC Station with the Station Configuration
Editor, you must choose "IE General" for the Industrial Ethernet interface.
You can connect other devices such as a mouse, keyboard, or storage device to
SIMATIC Panel PC 477B-HMI/RTX through the USB ports. A USB mouse and USB
keyboard are necessary only for user interaction with the controller or with other software. To
use the restore CD (Page 50) , you need a USB CD-ROM drive. You do not need a storage
device for WinLC RTX operation other than to restore your installation.
