SIJECT OP15B Screens
SIJECT 16i Operation Manual
3-13
Fig 3-14
Alarm screen 2 - continued
Operating sequences
Press alarm key to enter the alarm screen, altogether 32 alarms are
displayed here. See Fig 3-12 Alarm screen 1 and Fig 3-14 Alarm screen 2
– continued. When an alarm appears, the alarm indicator
(see Table 3-
1) is flashing to inform the user to check the alarm screen.
On the alarm screen, the box in front of the current alarm is backlight. Then
users should take corresponding correction activities to clear alarm
resource, and press acknowledgment key
or manual mode key
to acknowledge and delete the alarms.
Press soft key F1
to enter the event record screen. See Fig 3-13,
Alarm screen 1.1 – event record screen. This screen can also be called by
pressing Information key.
Press soft key F2
to enter the next layer of screen. See Fig 3-14
Alarm screen 2 – continued. Other alarms can be checked.
