Operator panel keys
SIJECT 16i Operation Manual
2-9
Core 2 key
Press the middle Core 2 key to enter Core 2 screen.
Input corresponding parameter for core 2, such as position, pressure, flow,
time and counting.
Keep pressing the left key to let core 2 in.
Keep pressing the right key to let core 2 out.
Air-blow key
Press the middle Air-blow key to enter Air-blow screen.
Input corresponding parameter (position and time) for Air-blow 1 and Air-
blow 2.
Air-blow 1 will work if you press the left key.
Air-blow 2 will work if you press the right key.
Mold adjustment key
Press the middle Mold adjustment key to enter Mold adjustment screen.
Input pressure and flow for mold adjustment. There are two ways to adjust
mold. When manual mold adjustment is selected, you can set pulse here. If
auto mode is selected, you can set the time of adjusting.
Mold adjustment retracts if you keep pressing the left key.
Mold adjustment advances if you keep pressing the right key.