SIJECT OP15B Screens
SIJECT 16i Operation Manual
3-5
Element
Indicator
Meaning
(9)
Event message
When this indicator is flashing, it means certain
events happened. Check the event screen and
take correction activities. Once the event is
eliminated, it will stop flashing.
(10)
Alarm message
When this indicator is flashing, it means certain
alarm happened. Check the alarm screen and take
correction activities. Once the event is eliminated, it
will stop flashing.
Displaying field:
1) when one small square indicator becomes light on, it means the
machine is working at the indicated step.
2) when a parameter block is not backlighting, it means this block is
allowed to be set; if a block is backlighting, then this block is parameter
displaying.
3) if the screen with cursor function selection, it is requested to use the
cursor first. Move the cursor to the wanted item, and press the
Selection key
. Then press cursor up or down key to select the
function and use “Enter” key to confirm the setting.
4) for the basic operating pictures, it is necessary to enter password 1 to
set parameters for the first power-on; or, after 5 minutes, users should
input password 1 for the second time to carry out parameters
operation. For service picture (OEM), password 2 must be input. Refer
to section 3.1.10 “Service screen” for password setting and changing.
