Siemens SICHARGE UC Operating Instructions Manual Download Page 30

Page: 30 / 114

SICHARGE UC Dispenser UL |

Operating Instructions

SECTION 4

Application planning

4.1 Incoming inspection of the devices

4.1.1 Checking the delivery for completeness and correctness

When the carrier delivers the SICHARGE UC dispenser, you should immediately perform

an incoming inspection of the devices.

Checking delivery

Begin the incoming inspection of the equipment with the following steps:

• Check the completeness of the delivery

• Check that the delivery documents correspond to the goods delivered

Additional material

The following is transferred directly to the customer during the transfer process:

• Documents

• Password

Note

Disclaimer of liability

Customers are responsible for safekeeping of the documents and objects received. Siemens is not

obligated to reproduce transferred documents and objects.

Siemens is not liable for the improper use of intelligent devices.

Summary of Contents for SICHARGE UC



















































































































Search results

Summary of Contents for SICHARGE UC

Reviews:

Related manuals for SICHARGE UC

Brands by name

Popular brands

Siemens SICHARGE UC, Operating Instructions Manual

Search results

Summary of Contents for SICHARGE UC

Reviews:

Related manuals for SICHARGE UC

Brands by name

Popular brands