Siemens SENTRON 3KC0 Manual Download Page 28

Page: 28 / 144

Mounting

5.3 Mounting the 3KC0 transfer switching equipment

3KC0 manual transfer switching equipment

Manual, 09/2018, L1V30368969105-01

Procedure

Insert the transfer switching equipment with the plug-in assembly on the DIN rail from

above.

Push the transfer switching equipment back until the plug-in assembly audibly locks into

place on the underside.

5.3.2

Removal from DIN rail for sizes 1 and 2

Overview

Procedure

Lever the first slide for DIN rail mounting out of the enclosure, e.g. using a slotted

screwdriver.

The slide locks into place audibly.

Lever the second slide for DIN rail mounting out of the enclosure, e.g. using a slotted

screwdriver.

The slide locks into place audibly.

Lift the transfer switching equipment off the DIN rail.

Push the first slide into the enclosure.

Push the second slide into the enclosure.

Summary of Contents for SENTRON 3KC0

















































































































































Search results

Summary of Contents for SENTRON 3KC0

Reviews:

Related manuals for SENTRON 3KC0

Brands by name

Popular brands

Siemens SENTRON 3KC0, Manual

Search results

Summary of Contents for SENTRON 3KC0

Reviews:

Related manuals for SENTRON 3KC0

Brands by name

Popular brands