Siemens Industry, Inc.
Building Technologies Division
P/N 315-050537-3
10
•
If the DLC Protokoll and/or Profinet IO RT-Protocol are not installed:
*
From the Local Area Connections Properties, click Install.
*
Select Network Component Type “Protocol” and click Add.
*
From the Select Network Protocol window, click “Have Disk”.
*
Select the DLC Protokoll from Network Protocol column, then
click OK.
Figure 15
DLC Protokoll and/or Profinet IO RT-Protocol Installation
•
The laptop/PC being used to configure a switch needs to be on the same
network as the fiber switches. To do this temporarily change the IP address
of the laptop/PC.
*
From Local Area Connection Properties dialog window select
“Internet Protocol (TCP/IP)” and click Properties.
*
Choose “Use the following IP address” and pick an address in
the same network as the fiber switch.
*
Use a subnet mask of 255.255.255.0.
Figure 16
Changing the IP Address of the Laptop/PC
