Siemens POL955, Instructions For Installation, Use And Maintenance Manual

Page: 95 / 96

95
TUTORBIT
COSMOGAS
6 - USE
Alarm config
N/A
Installer
0x01FC (?...?)
Alarm delay
Delay between the alarm and it being signalled
Installer
0...3600
0 s
Contact function
Contact function normally open or closed
Installer
NO...NC
NO
Circuit 2 R
T
Same menu as for “Circuit 1 R
T”
Installer
Circuit 3 R
T
Same menu as for “Circuit 1 R
T”
Installer
Circuit 4 R
T
Same menu as for “Circuit 1 R
T”
Installer
Circuit 5 R
T
Same menu as for “Circuit 1 R
T”
Installer
Circuit 6 R
T
Same menu as for “Circuit 1 R
T”
Installer
Enab DHW
Same menu as for “Circuit 1 R
T”
Installer
Alarm input Heat Pump
Same menu as for “Circuit 1 R
T”
Installer
Software info
User
Boiler Cascade
Software version and date
User
Main page
User
Day Date
Time
User
State 100% 100% 100% 100%
State of the heat generators intended as Stb = stand-by or percentage of 0-10V signal received
User
Cascade S 100°C M 100°C
Cascade sensor setting S = Setpoint temperature; M = Measured temperature
User
1 OFF S 100°C M 50°C
Heating circuit 1 state and setting:
ANF =
Antifreeze; Stb = stand-by; ON = heat demand; OFF = circuit of
f; S
= Setpoint temperature; M = Measured temperature
User
Heating circuit 1 state
2 OFF S 100°C M 50°C
Heating circuit 2 state and setting:
ANF =
Antifreeze; Stb = stand-by; ON = heat demand; OFF = circuit of
f; S
= Setpoint temperature; M = Measured temperature
User
Heating circuit 2 state
3 OFF S 100°C M 50°C
Heating circuit 3 state and setting:
ANF =
Antifreeze; Stb = stand-by; ON = heat demand; OFF = circuit of
f; S
= Setpoint temperature; M = Measured temperature
User
Heating circuit 3 state
4 Stb 60°C M 63°C
Heating circuit 4 state and setting:
ANF =
Antifreeze; Stb = stand-by; ON = heat demand; OFF = circuit of
f; S
= Setpoint temperature; M = Measured temperature
User
Heating circuit 4 state
DHW OFF 100°C
DHW circuit state and setting:
ANL
=
Anti-legionella; Stb = stand-by; ON = heat demand; OFF = circuit of
f;
Temperature measured by the domestic hot water tank sensor
User
State and temperature measured by the DHW sensor (when present)
Solar OFF 100°C
Solar circuit state and setting:
ANF =
Antifreeze;
ASG =
Anti-stagnation; Stb = stand-by; ON = heat demand;
OFF = circuit of
f; T
emperature measured by the solar panel sensor
User
State and temperature measured by the solar panel sensor
“ESC” key pressed quickly: If you are viewing the synoptic screen, go to the main menu. If you are at any step within the menu, go back without saving. “ESC” key pressed for 2sec. (Only valid for HMI POL895) HMI settings
Remote control settings
User
V10.50 B0122
User
Backlight colour
User
Blue...White
Blue
Backlight timed switch-of
f
User
0...300
0
Contrast
User
0...60
60
Brightness
User
0...100
100
Firmware update
User
Yes...No
No