Siemens POL955, Instructions For Installation, Use And Maintenance Manual

Page: 5 / 96

5
TUTORBIT
COSMOGAS
2.2 - Meaning of the symbols used
ATTENTION !!!
Risk of electric shock. Failure to follow these warnings can
jeopardise proper appliance operation or cause serious
damage to persons, animals or property.
Generic danger !!!
Failure to follow these warnings can jeopardise proper
appliance operation or cause serious damage to persons,
animals or property.

Important instruction symbol
2 - GENERAL INFORMATION
2.1 - Introduction
This manual is for the TutorBit system which may consists of the following products
Code Description Use
62612791 TutorBit_ System controller consisting
of a POL687 model controller and a
POL895 remote control
System controller able to control:
- Up to 4 heat generators
- Two heating circuits
- One DHW circuit controlled by a temperature sensor (or
alternatively by an ON/OFF thermostat)
- One DHW recirculation circuit
- One alarm output
- One outdoor sensor
- One DHW able/enable input
- Modbus communication towards the MYDENS T or
AGUADENS T range of heat generators
- Ethernet communication toward the PC (WEB Server
connection) and/or communication toward an Internet
Cloud.
- KNX communication for Room Sensor QMX3
- Connection to a remote control POL895
62612792 POL945_ Multifunction expansion in
logical address position “1”
Expansion able to control:
- Solar circuit
- An heating circuit
- Anti-legionella start from external input
- Shuffle pump for the hot water tank or anti-legionella
mixing
62612792 POL945_ Multifunction expansion in
logical address position “2”, “3” or “4”
Expansion able to control an heating circuit
62612793 POL955_Expansion for Heat pump Expansion to control an Heat pump
62612822 QMX3 Room Unit Room temperature sensor, modulating, multifunction
connectable via KNX bus
The products listed below are not covered in this manual, but described in dedicated documents.
62110067 Outdoor temperature sensor
62111071 Temperature sensor for supply circuits
or for a hot water tank
62111020 PT1000 solar panel supply sensor
2.3 - Disposal
The crossed wheelie bin symbol means that the product
must not be thrown away in the ordinary rubbish bin (i.e. in
with “mixed urban rubbish”); it must be dealt with separately,
in order to undergo suitable operations for it to be reused or
treated, so that any substances that are dangerous for the
environment can be removed and disposed of safely. This
will enable all the raw materials to be recycled. The user is
responsible for getting rid of the boiler at the end of its life,
delivering it to a recycling centre run by the local authority or
city hygiene companies, or, when he/she buys a new boiler,
giving the product that has been replaced to the dealer, who is
obliged to take it under the terms of EU Directive 2012/19/EU.
For further information regarding correct decommissioning
of these units, users can contact the public service in charge
or retailers.