Siemens optiPoint 410 advance S User Manual Download Page 27

Page: 27 / 127

Operating the Telephone with the Display

Step by Step

Displaying the Call Log

Select and confirm.

Select list

Confirm.

Select and confirm.

The lists are sorted chronologically, with the most re-
cent entry first.

You can scroll through the lists using the

and

keys.

Select entry

Select the entry you require from the relevant list.

For example, select the third entry and confirm.

Display details

You can display details for the selected party.

Select and confirm.

The display shows the date and time of the call. If the
same call has been entered repeatedly, the date and
time of the last call appear in the display.

02=Call Log?

1=Missed calls?

2=Dialled calls?

3=Received calls?

3=543219876?

2=Details?

Summary of Contents for optiPoint 410 advance S
































































































































Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands

Siemens optiPoint 410 advance S, User Manual

Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands