Siemens optiPoint 410 advance S User Manual Download Page 20

Page: 20 / 127

Step by Step

Operating the Telephone with the Display

Incoming Calls

The optiPoint 410/420 advance S V6.0 rings giving the
set call signal

page 63.

If calling party information is transferred, it appears in
the display.

Answering a Call With the Handset

The telephone rings. The caller is displayed on the
screen.

Lift the handset.

Set call volume. To raise or lower the volume, press the
relevant key until the desired volume is set.

Answering a Call Without the Headset

(Speakerphone Mode)

The telephone rings. The caller is displayed on the
screen.

Confirm

Press key. LED lights up.
Speakerphone mode.

Adjust volume. To raise or lower the volume, keep
pressing the keys until the desired volume is set.

Notes on speakerphone mode:

•

Tell the other party that you are using speakerphone
mode.

•

The speakerphone works bests at a low receiving
volume.

•

The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).

If you are defining settings on the telephone
when a call arrives, the process is paused. After
the telephone conversation, the telephone auto-
matically returns you to the point in the menu
structure you were in before the call.

Answer call?

Loudspeaker

Summary of Contents for optiPoint 410 advance S
































































































































Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands

Siemens optiPoint 410 advance S, User Manual

Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands