Siemens optiPoint 410 advance S User Manual Download Page 43

Page: 43 / 127

Customizing the Telephone

Step by Step

Select numeric input.

The new setting is displayed.

Call Display

This function allows you to define what kind of caller in-
formation (Calling Line Identification) is displayed for in-
coming calls.

Possible options are:
1=Name
2=Number
4=No display
5=Name and Number

If the appropriate data is not available, the next available
ID is displayed.

Prerequisite

: You are in the "Configuration" menu

page 38.

Select and confirm.

Select the required option and confirm. The new setting
is displayed.

Daylight Saving

You can use this function to stipulate that the clock on
your telephone switches to summertime and winter-
time automatically.

Prerequisite

: You are in the "Configuration" menu

page 38.

Select and confirm.

Confirm. Daylight saving activated.

2=Number?

In a HiPath 3000/HiPath 4000 environment, the
caller's number is displayed instead of the name.
If no number is transmitted, the name display
shows "Anonymous". Therefore it is recommend-
ed to select "Name and Number" for the call dis-
play.

Please note that when you select the "No display"
option,

"missed calls" or "received calls" are

saved

in the Missed Calls list (see

page 26).

13=Call display?

5=Name and Number?

14=Daylight Saving?

Switch on?

Summary of Contents for optiPoint 410 advance S
































































































































Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands

Siemens optiPoint 410 advance S, User Manual

Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands