Siemens optiPoint 410 advance S User Manual Download Page 59

Page: 59 / 127

Customizing the Telephone

Step by Step

Select and confirm to keep the existing label.

The phone is now ready to dial with this function key in
the programmed level.

If you want to program another key (or key level of the
same key), you can select the level again.

For programming the second level:

Confirm. You are prompted to press a key.

Press the function key to be programmed (the associat-
ed LED blinks).

Confirm.

Select and confirm.

Enter the telephone number or name to be stored and
confirm.

When programming function keys on an

optiPoint 420 advance S V6.0

optiPoint self labeling key module

the electronic la-

beling function

Label

is displayed with the following

prompt:

Confirm to adapt the electronic key labeling.

Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.

Select and confirm to keep the existing label.

The phone is now ready to dial with this function key in
the programmed level.

If you want to program another key (or key level of the
same key), you can select the level again.

Continue?

If you are using an optiPoint 410 advance S V6.0
write the function that you have assigned to the
key on the label card to identify it

page 121.

2=Shifted keys?

On the second level, only phone numbers and
names, including

repertory dialing

can be pro-

grammed.

02=Selected dialing?

Program destination #? >

Change?

Continue?

Summary of Contents for optiPoint 410 advance S
































































































































Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands

Siemens optiPoint 410 advance S, User Manual

Search results

Summary of Contents for optiPoint 410 advance S

Reviews:

Related manuals for optiPoint 410 advance S

Brands by name

Popular brands