Siemens NK8000 MP4.40 Series Application & Planning Download

Page: 73 / 96

NK8000 application examples

Building Technologies

049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc

CPS Fire Safety

09.2016

4.4 Interactions

Interactions are possible between the subsystems connected to NK82xx and the digi-
tal I/O modules. Incoming messages can trigger one or more command messages to
other subsystems.

Note:

Incoming messages can be combined with the logical operators AND, OR,

XOR, and NOT.

The configuration is done via an easy to use interactions tool, and then downloaded to
the NK82xx.

Fig. 45 Local interactions between subsystems connected to NK8235

Note:

NK823x also supports interactions between locally connected subsys-

tems and DF80xx digital I/O modules.

Fig. 46 Local interactions on NK8232

Summary of Contents for NK8000 MP4.40 Series

































































































Search results

Summary of Contents for NK8000 MP4.40 Series

Reviews:

Related manuals for NK8000 MP4.40 Series

Brands by name

Popular brands

Siemens NK8000 MP4.40 Series, Application & Planning

Search results

Summary of Contents for NK8000 MP4.40 Series

Reviews:

Related manuals for NK8000 MP4.40 Series

Brands by name

Popular brands