3.4.4 Capsule
ejection
At the end of the brewing cycle the capsules are emptied into the
capsule container.
If the capsule container is filled up to the indicating limit, no more
coffee can be brewed. (Capacity approx. 10–12 capsules)
Empty capsules
is displayed.
►
Pull drip trays with
capsule container
(A)
forwards out of the
appliance.
►
Empty trays and capsule
container and reinsert.
When the drip tray is removed
and there is no capsule container,
Check container
is displayed.
Coffee brewing is not possible if
this display is indicated.
As long as
Check container
is displayed, the thermal block does
not heat. The solenoid valve remains closed.
3.4.5
Permanently changing the amount of liquid
The preset amount for a small or
a
large coffee can be changed
permanently.
►
Insert capsule with the
membrane face down into
the capsule infeed.
►
Place a cup or glass
under the coffee outlet.
►
Press “on” button
(e)
or
(f)
for at least
3 sec
. and
hold down until the
required amount has run
through.
The amounts of liquid can be
changed again at any time.
3.4.5.1
Standard filling amounts
Small cup
40 ml
Large cup
100 ml
Filling amounts between 20 ml and 300 ml can be programmed for
each cup.
58300000116013_en_a – 21.08.06
Seite 9 von 61
