manualshive.com logo in svg

Siemens Nespresso TK911, Repair Instructions

Share
Download
Siemens Nespresso TK911 Repair Instructions Download Page 13

 
 

3.8 

Preparing cappuccino and latte macchiato 

With this appliance, preparing cappuccino or latte macchiato is 
simplicity itself. 

3.8.1 Preparing 

cappuccino 

 

 

►

 

Firmly connect the frothing-
up device to the adapter on 
the steam pipe. 

►

 

Insert the notched end of 
the hose into a receptacle 
containing milk. 

►

 

Position a large cup under 
the coffee outlet and direct 
the nozzle of the frothing-up 
device into the cup. 

►

 

Set the selector on the 
frothing-up device to 
CAPPUCCINO. 

►

 

Place the capsule on the balcony with the membrane 
downwards. 

►

 

Press button 

(c)

 CAPPUCCINO. 

After a short time an optimum mix of frothed milk and coffee will 
automatically flow into the cup. 

The despensing of milk or coffee can be interrupted at any time by 
pressing the button CAPPUCCINO 

(c)

 or LATTE MACCHIATO 

(d)

. 

3.8.2 

Preparing latte macchiato 

►

 

Firmly connect the frothing-up 
device to the adapter on the 
steam pipe. 

►

 

Insert the notched end of the 
hose into a receptacle 
containing milk. 

►

 

Remove the small drip tray. 
Place a large glass under the 
coffee outlet. 

►

 

Direct the nozzle of the 
frothing-up device into the 
glass. 

►

 

Set the selector on the 
frothing-up device to 
CAPPUCCINO. 

►

 

Place the capsule on the balcony with the membrane 
downwards. 

►

 

Press button 

(d)

 LATTE MACCHIATO. 

After a short time an optimum mix of frothed milk and coffee will 
automatically flow into the glass. 

The despensing of milk or coffee can be interrupted at any time by 
pressing the button CAPPUCCINO 

(c)

 or LATTE MACCHIATO 

(d)

. 

 

58300000116013_en_a – 21.08.06 

Seite 13 von 61 

Summary of Contents for Nespresso TK911






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands