manualshive.com logo in svg

Siemens Nespresso TK911, Repair Instructions

Share
Download
Siemens Nespresso TK911 Repair Instructions Download Page 17

 
 

3.10 Cleaning 

m 

Risk of electric shock! 

►

 

Before cleaning the appliance, pull out the mains plug.  

►

 

Never immerse the appliance in water.  

►

 

Do not use a steam cleaner. 

3.10.1  Daily cleaning of the appliance 

►

 

Rinse out the water tank and fill with fresh water. 

►

 

Pull the drip tray and capsule container forwards 

(1)

, empty 

(2)

 and clean with a mild detergent solution. When re-inserting 

the parts, ensure that they are fitted together correctly. 

 

 

 

Pull out the coffee outlet 

(1)

 forwards and then the capsule holder 

(2)

.  

Clean with a mild detergent solution (

not dishwasher-proof

). 

 

 

First re-insert the capsule holder 

(2) 

and then the coffee outlet 

(1)

. 

Note:

 

If the appliance is cold when switched on, the appliance is 
rinsed automatically. 

58300000116013_en_a – 21.08.06 

Seite 17 von 61 

Summary of Contents for Nespresso TK911






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands