3.9.4 Energy-saving
mode
The appliance switches automatically to energy-saving mode if it was
not used for 1 hour.
When energy-saving mode is active, the heater switches off, the cup
heater remains active.
Energy
-
saving mode
is displayed.
Energy-saving mode can be changed from
Energy
-
saving mode
–
on
to
Energy
-
saving mode
–
off
.
When the appliance is switched on again from energy-saving mode,
first wait for the heating up phase.
3.9.5 Cup
heater
The cup heater is heated by an active PTC element.
The function of the cup heater can be changed from
Cup heater
–
off
to
Cup heater
–
on
.
For a successful coffee preheat the cups on the cup heater:
The temperature of the cup heater may increase to
50 °C
.
3.9.6 Note
The functions
Start descaling cycle
and
Reset descaling alarm
are required for the descaling programme.
3.9.7 Rinsing
One of two settings can be selected:
Automatic
Appliance automatically rinsed.
Manual
Each time the request is indicated by the
Rinsing?
display text
/
Press button
►
Check that all collecting pans have been inserted and press
the “Large cup” button; the appliance is rinsed.
3.9.8 Reset
If
Yes
, all settings changed here in programming mode and the
modified amounts of liquid can be reset to the original factory setting.
58300000116013_en_a – 21.08.06
Seite 16 von 61
