Siemens Multi Panel MP270 SIMATIC HMI, Equipment Manual

Page: 97 / 144

Technical Data
A-5
MP270 Equipment Manual
Release 01/99
The following approvals have been applied for or already granted on supply.
Please refer to the rating plate on the rear of the unit for identification.
Approvals
UL approval UL Recognition Mark
3)
Underwriters Laboratories (UL) complying with Standard UL 508,
File E 120869
CSA Approval CSA Certification Mark
4)
Canadian Standard Association (CSA) complying with
Standard C 22.2 No. 142, File LR 89077-19
FM Approval FM Approval
Complying with Factory Mutual Approval Standard Class Number
3611 Hazardous (classified) Locations Class I,
Division 2, Group A, B, C, D
Warning:
Personal injury and equipment damage can occur.
Personal injury and equipment damage can occur in
hazardous areas if a plug connection is disconnected
from the operating unit while the system is running.
In hazardous areas, always switch off the power supply
to the operating unit before disconnecting plugs.
!
Warning:
DO NOT DISCONNECT WHILE CIRCUIT IS LIVE
UNLESS LOCATION IS KNOWN TO BE NON-
HAZARDOUS.
!
3), 4) The UL und CSA file numbers are dependent on the production site. The numbers
specified here change according to the production site.