Siemens MOBY D, User Manual

Page: 58 / 176

R 01.04
E-52
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
6 Expanded Functions
6.1 Storing the MDS Data on the Hand-Held
Terminal
The data read from the MDS are automatically stored on the hand-held terminal
in a file named “READ_D.HEX,” “READ_E.HEX,” “READ_F.HEX,”
“READ_I.HEX” or “READ_U.HEX” on the “RAMDRIVE” drive of the PSION.
Every additional read command overwrites this file.
When the MDS is write-accessed, the write data are written from the editor to
the MDS and also to the “RAMDRIVE (M:)” drive of the PSION under the name
“WRITE_D.HEX,” “WRITE_E.HEX,” “WRITE_F.HEX,” “WRITE_I.HEX” or
“WRITE_U.HEX.” Every additional write command overwrites this file.
The “file/load file” function shows all files with the file extension “.HEX.” You
can select one of them with the cursor keys. This file is then loaded to the edi-
tor. There is no storage under the name READ_x.HEX or WRITE_x.HEX.
The “file/save” function stores the data of the editor in a file with the file exten-
sion “.HEX” and at the same time the ID number in a file with the file suffix
“.HX1” on the RAMDRIVE drive of the PSION (i.e., drive M:). You can specify
any name of 1 to 8 alphanumeric characters.
Note
When you read data from the MDS, modify data in the editor and
then save the data, the modified data will be stored in the .HEX file.
Expanded Functions