If your System has a printer, it prints a message similar to the following and adds
SYSTEM NOT RESET on the bottom line:
RESET 12:50:58 Jul 03, 20xx
Not All Acknowledged Yet. System Not Reset.
When the System performs a Soft Reset, the display shows the following message:
SYSTEM RESET
The System then returns to Normal mode and the display shows the following:
11:59:59 DEC 31, 20xx
SYSTEM
[custom System message]
NORMAL
If your System has a printer, it prints the following message:
RESET 12:50:58 Jul 03, 20xx
System Reset.
If the System is already in Normal mode when you press RESET, it displays
SYSTEM ALREADY NORMAL
and does not reset.
Please refer to Chapter 3
MXL/MXLV Control Panel Operation,
Installation, and
Maintanence Manual,
P/N 315-092036, for Voice Operation
.
Please refer to Chapter 3
MXL/MXLV Control Panel Operation,
Installation, and
Maintanence Manual,
P/N 315-092036, for Using the Menu.
When reading "Using the Menu" in the above referenced manual, substitute DOWN
for NEXT and UP for HOLD. The HOLD feature is not needed to freeze the screen
when using the Multi-Line Display.
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
P/N 315-048692-2
