Safety Regulations
7
Building Technologies
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Fire Safety & Security Products
06.2010
1 Safety
Regulations
This chapter describes the danger levels and the relevant safety regulations appli-
cable for the use of Siemens FSP-DMS products. Please read the following sub-
sections, as well as the previous section "About this document" thoroughly before
beginning any work.
1.1
Country-specific standards
Siemens FSP-DMS products are developed and produced in compliance with the
relevant international and European safety standards. This document provides
warnings and recommendations specific to the MK8000 OPC Server. Any addi-
tional country-specific or local safety standards and/or regulations that apply con-
cerning project planning, and installation and operation of the MK8000 OPC Server
must also be taken into account.
1.2
Assembly, installation, commissioning and testing work
Activate security-, fire- and third party systems or devices
only
in the presence
of the person responsible.
Abide by the safety regulations of the connected sub-systems when working on
management stations. This especially applies when switching-off system com-
ponents.
Inform people before the testing of alarm devices - consider the possibility of
panic reactions.
Inform the alarm and fault receiving stations connected to the system before
carrying out tests.
1.3
Modifications to the system design and the products
Modifications to a system or to individual products may cause faults or malfunc-
tioning.
Please request written approval from Siemens Building Products, Fire and Safety
Division, and any relevant authorities concerning intended system modifications
and system extensions.
1.4
Data Privacy and Protection
Make sure that the configuration of the MK8000 system complies with local
data
privacy and protection regulations
.
