manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 75 / 95

Share
Download
Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 75

5-24 

February 5, 2004 

 

 

FFDM-S Service Manual

Viewing Information About the Generator

To view information about the Generator,

 click the Information/Status link on 

the Generator Control Panel page, or the Info link on any of the other Generator 

pages. The Generator Information - Summary page displays.

To view more detailed Generator information, click the 

Detailed 

button. A sample 

of the Generator detailed information is shown on the next page.

NOTE:

 The Generator Information page also includes an 

Advanced

 button for displaying even more 

detailed information. However, this advanced information is intended only as an aid to Direct 
Radiography Corp. Support staff in troubleshooting Generator problems. For this reason, you will 
typically be using this function only at the direction of Direct Radiography Corp. Support.

Summary of Contents for MAMMOMAT NovationDR
































































































Reviews:

No comments