manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 30 / 95

Share
Download
Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 30

February 5, 2004 

 

 

3-1 

3

Installation

This chapter explains how to install the DirectRay components: the Detector, the 

Power and X-ray Control Module (PXCM), and the Interface PCI card.
Installation should be performed in the following sequence:
1. Unpack the DirectRay components.
2. Install the DirectRay Detector in the bucky and the PXCM in the X-ray tower.
3. Connect the PXCM to the Detector, using the appropriate cable.
4. Connect the PXCM to the Generator, using the appropriate cable.
5. Install the DirectRay Interface PCI card in the Acquisition Workstation, then 

connect the PXCM to the Interface card using fiber optic cable.

6. Calibrate the Automatic Exposure Control (AEC).
Guidelines for installing the DirectRay hardware components are included in this 

chapter. For instructions on calibrating the AEC, refer to Chapter 4.

Summary of Contents for MAMMOMAT NovationDR
































































































Reviews:

No comments