manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 60 / 95

Share
Download
Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 60

PXCM Web Tool 

February 5, 2004 

 

 

5-9 

NOTE:

 To clear your file selection, click the 

Reset Form

 button.

4. When you are ready to start the software file transfer, click the 

Upgrade

 

button.
The file transfer status is displayed on the page.

5. After the transfer is complete, reboot the Detector to have it start up using the 

software you just transferred. For information about rebooting the Detector, 

refer to “Powering the Detector On and Off” on page 5-9.

Powering the Detector On and Off

To power the Detector on or off, or reboot it,

 click the Array Power Control 

link on the Array Control Panel page, or the Power link on any of the other Array 

pages. The Array Power Control page displays. Click the appropriate button for the 

operation that you want to perform.

NOTE:

 For security purposes, you may be prompted to enter a login name and password before 

executing this function. For more information, refer to “Function Security Levels and Login Prompts” 
on page 5-2.

Summary of Contents for MAMMOMAT NovationDR
































































































Reviews:

No comments