Siemens MAMMOMAT NovationDR Installation Instructions Manual Download Page 66

Page: 66 / 95

PXCM Web Tool

February 5, 2004

5-15

Viewing PXCM Application Information

NOTE:

PXCM application information is intended as an aid to Direct Radiography Corp. Support staff

in troubleshooting PXCM problems. For this reason, you will typically be using this function only at the
direction of Direct Radiography Corp. Support.

To view PXCM application information,

click the Application Control link on

the Brick Control Panel page, or the App link on any of the other PXCM pages. The

Brickman - Status page displays.

NOTE:

For security purposes, you may be prompted to enter a login name and password before

executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.

CAUTION

The Brickman page also includes an

Execute Command

button and an

Advanced

button. These functions are intended only as an aid to Direct Radiography

Corp. Support staff in troubleshooting PXCM problems. Use of these functions could
adversely affect PXCM operation.

Summary of Contents for MAMMOMAT NovationDR
































































































Search results

Summary of Contents for MAMMOMAT NovationDR

Reviews:

Siemens MAMMOMAT NovationDR, Installation Instructions Manual, Page: 66 / 95

Search results

Summary of Contents for MAMMOMAT NovationDR

Reviews: