OutdoorAP_ConnectingUp.fm
Connecting cables to the HiPath Wireless Outdoor AP
Fitting a power supply adapter
9034532, October 2009
HiPath Wireless Outdoor AP Installation Guide
35
To fit and connect a power supply adapter:
1. Fit the power supply adapter in the HiPath Wireless Outdoor AP, as depicted
in
Figure 21
. The connector on the rear of the power supply adapter must
engage fully in the socket of the housing. The entire rear surface of the power
supply adapter must make contact with the inner surface of the HiPath
Wireless Outdoor AP.
Figure 21
Using a power supply adapter in a HiPath Wireless Outdoor AP
2. Connect the power supply adapter and the HiPath Wireless Outdoor AP with
the screw supplied with the power supply adapter (position A in
Figure 21
).
3. Connect the cable for the power supply. The assignment of the contacts is
depicted in
Figure 21
.
4. Secure the power supply cable with a strain relief clamp.
Caution
Only use the loop (Position B in
Figure 21
) to remove the power supply adapter from the HiPath Wireless
Outdoor AP. This prevents the connector skewing on the back of the power supply adapter and breaking off.
