OutdoorAP_Description.fm
Mounting the HiPath Wireless Outdoor APs
Mounting the HiPath Wireless Outdoor AP with mounting plate
9034532, October 2009
HiPath Wireless Outdoor AP Installation Guide
23
3.5.5 Fitting the mounting plate to a mast
To fit the mounting plate to a mast
:
1. Feed the fastening straps through the openings in the mounting plate
(position A in
Figure 14
).
Figure 14
Mounting plate with fittings for mast mounting
2. Place the fastening straps around the mast at the required position.
3. Feed the free end of the strap through the quick-release fastener. You can
twist the tensioning screw (Position B in
Figure 14
) to the side to adapt a
fastening strap to the diameter of the mast.
4. Press the tensioning screw against the fastening strap and tighten the
tensioning screw, tightening torque 4.5 Nm.
