Connecting cables to the HiPath Wireless Outdoor AP
OutdoorAP_ConnectingUp.fm
HiPath Wireless Outdoor AP cables
9034532, October 2009
30
HiPath Wireless Outdoor AP Installation Guide
Antenna connector: N-Connect/R-SMA connecting cable
The N Connect/R SMA male/male flexible connecting cable is available as an
accessory for direct connection of an antenna to an HiPath Wireless Outdoor AP.
Antenna connector: N-Connect/ N-Connect connecting cable
The N Connect/N Connect male/male flexible connecting cable is available as an
accessory for connection of an antenna to the lightning protector LP798 1N.
Antenna connector: R-SMA Male to SMA Male connecting cable
The R-SMA/SMA Male/Male flexible connecting cable is available as an
accessory for connection of IWLAN link to cabinet feedthrough (pre-assembled
R-SMA Male to SMA Male)
Ethernet
IE FC TP Standard Cable GP 2 x 2 (type A)
Order no. 6XV1 840-2AH10
IE TP Torsion Cable 2 x 2 (type C)
Order no. 6XV1 870-2F
IE FC TP Trailing Cable 2 x 2 (type C)
Order no. 6XV1 840 3AH10
Application
Specification
Table 3
Cable specification
Warning
If temperatures in excess of 70 degrees occur on the cable or at the housing socket, or the
temperature at the branching points of the cables exceeds 80 degrees, special measures need
to be taken.
If the device is operated at an ambient temperatures of 55 degrees C – 70 degrees C, make sure
that you use cables with a permitted ambient temperature of at least 90 degrees C.
Length in m
Order number (ordered from Siemens A&D)
1
6XV1875-5CH10
2
6XV1875-5CH20
5
6XV1875-5CH50
10
6XV1875-5CN10
Table 4
Antenna connector: N-connect/R-SMA connecting cable
Length in m
Order number (ordered from Siemens A&D)
1
6XV1875-5AH10
2
6XV1875-5AH20
5
6XV1875-5AH50
10
6XV1875-5AN10
Table 5
Antenna connector: N-connect/N-Connect connecting cable
