Siemens Hicom 150 E Office User Manual Download Page 119

Page: 119 / 186

Abbreviated Dialing

119

Deleting Entries

You can delete all entries in the electronic note-
book or only those entries stored under a particular
name.

Deleting individual names with the
corresponding entries

Precondition:

You have searched for and marked

the required name or you call up the relevant en-
tries on the display (

118).

Press

to cancel the deletion procedure.

Deleting all entries

Press the DELETE key; this highlights the begin-
ning of each line.

Press “Enter” to delete the entire entry.

DEL

END

Press the MENU key to display the ENB main
menu.

Using the cursor keys, select “Delete all entries.“

Press “Enter”; check the display.

Summary of Contents for Hicom 150 E Office



























































































































































































Search results

Summary of Contents for Hicom 150 E Office

Reviews:

Related manuals for Hicom 150 E Office

Brands by name

Popular brands

Siemens Hicom 150 E Office, User Manual

Search results

Summary of Contents for Hicom 150 E Office

Reviews:

Related manuals for Hicom 150 E Office

Brands by name

Popular brands