Siemens HG193510ME Installation Instructions Manual Download Page 60

Page: 60 / 94

Operating the grill gas burner

Please note that the appliance door must be closed
during grilling.

Switching on the grill gas
burner

Open the appliance door.

Press the control knob for the grill and turn it anti-

clockwise to position

The gas burner ignites.
Keep the control knob pressed for a few seconds
until the flame stabilises.
Do not turn the knob beyond this setting.

Adjust the burner to the desired flame setting.

The flame is not steady between position

and

. Therefore, always select a position

between

and

Carefully close the appliance door.

Switching off the grill gas
burner

When the dish is ready, turn the control knob
clockwise to position

If the flame goes out

Switch off the control knob. Wait one minute and
switch the burner on again.

If the flame goes out, gas will escape. Never leave
the gas burner unattended during operation. Ensure
that there are no draughts.

Setting

Meaning

lowest flame setting

highest flame setting

Summary of Contents for HG193510ME































































































Search results

Summary of Contents for HG193510ME

Reviews:

Brands by name

Popular brands

Siemens HG193510ME, Installation Instructions Manual

Search results

Summary of Contents for HG193510ME

Reviews:

Brands by name

Popular brands