manualshive.com logo in svg

Siemens HG193510ME, Installation Instructions Manual

Share
Download
Siemens HG193510ME Installation Instructions Manual Download Page 27

25

Important information

Read the instructions for use carefully.
This will enable you to operate your appliance safely 
and correctly. 

This manual is valid for several models. Variations in 
details for each cooker are possible.

Please keep the instruction manual, installation 
instructions and the various accessories in a safe 
place. Please pass on these manuals and 
accessories to the new owner if you sell the 
appliance.

Transport damage

Check the appliance for damage after unpacking it. 
Do not connect the appliance if it has been damaged 
in transport.

Environmentally-friendly 
disposal

Dispose of packaging in an environmentally-friendly 
manner.

This appliance is labelled in accordance with 
European Directive 2002/96/EC on Waste Electrical 
and Electronic Equipment  WEEE.

Connections

Have a licensed professional carry out the electric 
and gas connection and the conversion to a different 
type of gas.
Assembly instructions are supplied with the 
appliance.

Any damage caused by the appliance being 
incorrectly connected is not covered under the 
guarantee. We assume no liability for damage and 
faults caused by connection and setting errors.

¦

Summary of Contents for HG193510ME































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands