Siemens Gigaset M34 USB Page 41 Application Download | Manualshive

Page: 41 / 60

background image

41

Dialler blocker

Gigaset M34 USB App / en / A31008-M403-R102-x4-7619 / Dialer_blocker.fm / 03.08.2006

Sc

hablone 2

005_0

7_2

7

Setting up the dialler blocker

In the default setting after installation, the dialler blocker is deactivated so that the pre-
vious functioning of your PC is not impaired. You must change this setting in order to
activate protection against diallers.

ì

Start the Gigaset M34 software to configure the dialler blocker.

ì

Click on the

DialerBlocker

option in the menu tree. The currently valid configura-

tion of the dialler blocker is displayed in the working area.

ì

Define the security level for dialler protection. You can choose from three options:

Do not allow outgoing calls

Protection against diallers is activated.
Every connection made by your PC via your ISDN base station is prevented. With this
setting no Internet functions are possible using your Gigaset base station.

Allow outgoing calls to these numbers

Protection against diallers is activated.
Create a personal list of allowed connections. Your PC can only make a connection
to the phone numbers entered here (e. g. Internet service providers, fax and SMS
services etc.).
– In the

Number

column, enter all phone numbers or number blocks to which you

want to allow a connection.
Enter the desired sequence of numbers for each. The maximum length of the
phone numbers is limited to 32 digits. You cannot enter any special characters.

– In the

Description

column, you can enter a brief description for each phone

number as an aid to subsequent identification.
The maximum length of the description is limited to 255 characters.

– Use the list's scrollbar if you want to enter more than 5 phone numbers.
You can change and extend this list as required at any time.

Allow all outgoing calls (no dialer protection)

Protection against diallers is deactivated (default setting).
Your PC can make any connection.

ì

Click on another option in the menu tree or close the Gigaset M34 software.
The new configuration of the dialler blocker is saved. Protection against diallers is
activated if specified.

«
...
39
40
41
42
43
...
»

Summary of Contents for Gigaset M34 USB





























































Reviews:

No comments

Related manuals for Gigaset M34 USB

Brand: NEC Pages: 2

Brand: NEC Pages: 47

Brand: Wagan Pages: 3

Brand: Tactic Pages: 4

Brand: Lindy Pages: 21

Cheetah Wireless-3501C

Brand: Accton Technology Pages: 50

PTV1000 - Push2TV - TV Adapter

Brand: NETGEAR Pages: 2

Brand: Shimano Pages: 24

Brand: cable matters Pages: 2

Brand: RODE Microphones Pages: 3

Thunderbolt MTB3-002-HD

Brand: Tripp Lite Pages: 31

Brand: ZyXEL Communications Pages: 8

Brand: Digitus Pages: 30

Brand: Lenze Pages: 8

HandyPort-Serial HPS-120

Brand: HandyWave Pages: 11

Brand: D-Link Pages: 50

Brand: Bosch Pages: 3

Brand: AUDAC Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands